Smock Photon

WindBarrier®

The REV’IT! WindBarrier® membrane is laminated between two separate layers of fabric: a stretchable outer layer, and a soft fleece inner layer. This combination blocks against wind and helps repel water. Stopping the wind and rain helps prevent hypothermia, and improves a rider’s level of comfort and warmth.

Prepared for SEESOFT CE-level 2 Insert Back Protector

The back protector pocket in this REV’IT! garment is tailor-made to accommodate the SEESOFT CE-level 2 back protector insert Type RV – an easy upgrade to maximize safety.

SEESMART CE-level 1 Elbow Protectors

SEESMART CE-level 1 Shoulder Protectors

SEESMART shoulder protectors offer the highest level of flexibility while still passing the EN 1621-1:2012 CE-level 1 impact tests, in both normal and hot (T+) conditions.

Ready for Avertum Tech-Air® airbag system – ONE SIZE UP

Under this garment you can wear our REV’IT! Avertum Tech-Air® Airbag – or a Tech5 airbag – if you purchase the garment one size bigger than your usual size.If you wish to wear a garment that is marked as “”Ready for Avertum Tech-Air® airbag system””, you must be sure that the garment can accommodate the expansion of the airbag and therefore we recommend following below fit equation:1.Measure chest circumference and divide the measurement by two;2.Measure garment flat on chest line;3.If the difference between point 1 and point 2 is 12 centimeters or bigger the garment is suitable to wear on top of the airbag.Note: Please keep in mind that the garment should be purchased in the correct size in order for the shoulder and elbow protection to fit properly and best protect you in case of a crash. In order to create space for the expansion of the airbag, you can remove all separate layers (thermal liners, water proof liners) that can restrict the expansion of the airbag in the event of a crash. Remove the separate back protector in your garment, if any, when wearing the airbag (a back protector is included in the airbag) and adjust all adjustment straps on body to the widest position.

Laminated reflective logo on chest

Laminated reflection on hood

Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric. This welding process also eliminates stitching seams, making the garments safer.

Adjustable back protection

Adjustment tab at cuffs

Adjustment drawcord at hem

Back Protector Cinch System

The back protector cinch system was designed for garments with a looser or oversized fit. When tightened through the strap, it makes sure the back protector sits close to the body, in the right position, while maintaining the shape of the outer shell. It is easily releases when you arrive at your destination or you are taking the garment off.

Two slit pockets on front

XL storage pocket

Loose fit

The Loose fit is designed to prioritize both comfort and esthetics. Unlike the Regular fit, the Loose fit has a more relaxed and generous cut which allows for maximum comfort and freedom of movement. This style also has a more casual look which adds to its appeal.

Short connection zipper

The short connection zipper is the shorter, simpler and quicker choice of our two connection zipper options. It lets you zip the motorcycle jacket and motorcycle pants together as one. For comfort and for safety.

Jeans loop

The loop at the back of this jacket enables you to attach it to your jeans, which prevents the jacket from creeping up: no more exposed back when riding your bike.

Fixed hood

Button fixation for hood

Thanks to the Button fixation the hood stays in place during the ride, preventing the wind from reaching the inside of the hood.

Adjustment drawcord at hood

Easy entrance zipper at side seam

3D mesh protector pockets

Softshell 3L

Mesh

DWR C0 Sustainable water repellent finish