Jacket Offtrack 2 H2O

Zippers on lower arms

Air outlet on upper back

Ventilation panels on chest

The ventilation panels on this garment allow for optimal airflow to keep the body cool while riding.

Detachable thermal liner

Detachable hydratex|3L liner

A 3-layer construction. The membrane has a layer of protective tricot laminated on each side of the membrane. This results in a waterproof and breathable membrane that is also very durable. This type of membrane also offers maximum flexibility, as it can be removed from the garment: wear the membrane inside the garment when the weather demands it, or take it out when you need maximum ventilation.

Prepared for SEESOFT CE-level 2 Insert Back Protector

The back protector pocket in this REV’IT! garment is tailor-made to accommodate the SEESOFT CE-level 2 back protector insert Type RV – an easy upgrade to maximize safety.

Prepared for SEESOFT CE-level 1 Divided Insert Chest Protector

The protector pocket in this REV’IT! garment is tailor-made to accommodate the Divided Chest Protector SEESOFT CE-level 1 – an easy upgrade to maximize safety.

SEEFLEX CE-level 2 Elbow Protectors

Certified CE-level 2 according to the new norm EN 1621-1:2012 the SEEFLEX protector is the latest innovation from the in-house R&D department. The new norm also tests the impact levels in various temperature ranges. The SEEFLEX protectors easily surpass the new norm without sacrificing wearer comfort.

SEEFLEX CE-level 2 Shoulder Protectors

Certified CE-level 2 according to the new norm EN 1621-1:2012 the SEEFLEX protector is the latest innovation from the in-house R&D department. The new norm also tests the impact levels in various temperature ranges. The SEEFLEX protectors easily surpass the new norm without sacrificing wearer comfort.

Ready for Avertum Tech-Air® airbag system – ONE SIZE UP

Under this garment you can wear our REV’IT! Avertum Tech-Air® Airbag – or a Tech5 airbag – if you purchase the garment one size bigger than your usual size.If you wish to wear a garment that is marked as “”Ready for Avertum Tech-Air® airbag system””, you must be sure that the garment can accommodate the expansion of the airbag and therefore we recommend following below fit equation:1.Measure chest circumference and divide the measurement by two;2.Measure garment flat on chest line;3.If the difference between point 1 and point 2 is 12 centimeters or bigger the garment is suitable to wear on top of the airbag.Note: Please keep in mind that the garment should be purchased in the correct size in order for the shoulder and elbow protection to fit properly and best protect you in case of a crash. In order to create space for the expansion of the airbag, you can remove all separate layers (thermal liners, water proof liners) that can restrict the expansion of the airbag in the event of a crash. Remove the separate back protector in your garment, if any, when wearing the airbag (a back protector is included in the airbag) and adjust all adjustment straps on body to the widest position.

Laminated reflection at chest

Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric. This welding process also eliminates stitching seams, making the garments safer.

Laminated reflection at upper arms

Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric. This welding process also eliminates stitching seams, making the garments safer.

Laminated reflection on back

Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric.

Laminated reflection on shoulders

Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric. This welding process also eliminates stitching seams, making the garments safer.

Adjustable elbow protection

The adjustable elbow protection pockets allow you to tailor the CE-rated elbow protection to three different heights to perfectly fit your body and for optimal comfort while riding.

Adjustment strap at lower arm

Adjustment tab at upper arm

Flexisnap at collar

The REV’IT! flexisnap makes it possible to adjust the collar circumference easily and personalize its fit to each rider. A jacket is often worn in more then one season, and the flexisnap makes it possible to adjust the collar within seconds. During winter a wider collar circumference accommodates combining the jacket with a balaclava or wind collar, while during summer, a wider circumference lets an all-important cooling wind into the collar.

Adjustment tab at cuffs

Adjustment drawcord at hem

Double adjustment strap at waist

Stash pocket on back

Two inner pockets

Waterproof inner pocket within waterproof liner

The internal pocket within the waterproof liner is waterproof.

Two inner waterproof pockets on waterproof liner

Inner pocket within thermal liner

The internal pocket within the thermal liner allows for additional storage and for riders to keep personal items close.

Two external pockets at thermal liner

Two stash pockets at front

Regular fit

The Regular fit is designed for comfortable wear, and it’s tailored to suit different body shapes and sizes. However, it is not considered loose. It falls around the body instead of conforming to the rider’s physique.

Long connection zipper

The long connection zipper is the longer, more secure choice of our two connection zipper options. It lets you zip the motorcycle jacket and motorcycle pants together as one. For comfort and for safety.

Short connection zipper

The short connection zipper is the shorter, simpler and quicker choice of our two connection zipper options. It lets you zip the motorcycle jacket and motorcycle pants together as one. For comfort and for safety.

Cuff zipper

The zipper at the cuff allows for easier entry into the sleeve and lets you wear the glove cuff under your outer shell and over your base layer.

Soft edge at collar

For extra comfort, the inside of the collar is covered with a soft fabric.

V-flap at cuff

Separately wearable thermal liner

Thermal liner doubles as separately wearable jacket off the bike.

3L hydratex over jacket

Specifically designed waterproof jacket to wear over the outer shell.

Softshell 3L

Mesh

High density polyester 600D

This fabric takes polyester yarn and weaves it with a finer polyester yarn, to create a high woven density that increases protection and abrasion-resistance.

PWR| shell ripstop

Fabric made for durability and abrasion resistance thanks to its special ripstop weaving with interwoven reinforcement threads at regular intervals.

Mesh

Soft spacer mesh

In-between, mesh lining to assure wearing comfort and fit.

Soft spacer mesh protector pockets

In-between, mesh lining to assure positioning of protection components.

Outer shell made with recycled polyester