Jacket Quantum 3

Perforation on upper front

Ventilation panels on lower arms

The ventilation panels on this garment allow for optimal airflow to keep the body cool while riding.

Perforation on upper back

Ventilation panels on lower front

The ventilation panels on this garment allow for optimal airflow to keep the body cool while riding.

Ventilation panels at lower back

The ventilation panels on this garment allow for optimal airflow to keep the body cool while riding.

Detachable thermal body warmer

Wind catcher behind front zipper

Behind the front a panel has been installed to block the wind.

Wind catcher behind cuff zipper

Prepared for SEESOFT CE-level 2 Insert Back Protector

The back protector pocket in this REV’IT! garment is tailor-made to accommodate the SEESOFT CE-level 2 back protector insert Type RV – an easy upgrade to maximize safety.

Prepared for SEESOFT CE-level 1 Divided Insert Chest Protector

The protector pocket in this REV’IT! garment is tailor-made to accommodate the Divided Chest Protector SEESOFT CE-level 1 – an easy upgrade to maximize safety.

SEEFLEX CE-level 2 Elbow Protectors

Certified CE-level 2 according to the new norm EN 1621-1:2012 the SEEFLEX protector is the latest innovation from the in-house R&D department. The new norm also tests the impact levels in various temperature ranges. The SEEFLEX protectors easily surpass the new norm without sacrificing wearer comfort.

SEEFLEX CE-level 2 Shoulder Protectors

Certified CE-level 2 according to the new norm EN 1621-1:2012 the SEEFLEX protector is the latest innovation from the in-house R&D department. The new norm also tests the impact levels in various temperature ranges. The SEEFLEX protectors easily surpass the new norm without sacrificing wearer comfort.

Ready for Avertum Tech-Air® airbag system – ONE SIZE UP

Under this garment you can wear our REV’IT! Avertum Tech-Air® Airbag – or a Tech5 airbag – if you purchase the garment one size bigger than your usual size.If you wish to wear a garment that is marked as “”Ready for Avertum Tech-Air® airbag system””, you must be sure that the garment can accommodate the expansion of the airbag and therefore we recommend following below fit equation:1.Measure chest circumference and divide the measurement by two;2.Measure garment flat on chest line;3.If the difference between point 1 and point 2 is 12 centimeters or bigger the garment is suitable to wear on top of the airbag.Note: Please keep in mind that the garment should be purchased in the correct size in order for the shoulder and elbow protection to fit properly and best protect you in case of a crash. In order to create space for the expansion of the airbag, you can remove all separate layers (thermal liners, water proof liners) that can restrict the expansion of the airbag in the event of a crash. Remove the separate back protector in your garment, if any, when wearing the airbag (a back protector is included in the airbag) and adjust all adjustment straps on body to the widest position.

Laminated reflection on back

Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric.

Adjustment strap at waist

Slit pocket at waist

Inner napoleon pocket

Three inner pockets

Safety seams

The stitching in motorcycle garments contributes greatly to the abrasion resistance of the total gear. This is why REV’IT! uses safety seams on garment areas at increased risk of impact. Safety seams have a visible as well as an invisible seam. This construction keeps the material of the outer shell together, even when the visible seam is thorn.

TPU protection at shoulder

Tight fit

The Tight fit is designed to be snug and conform to the rider’s body shape. The contouring design ensures that the material and fabrics move with the body, without restricting the range of motion in any situation. This fit is mostly found in base layers and in our race-oriented garments.

3D mesh

Mesh

Polyester ripstop

Polyester ripsotp is a lightweight fabric with special fibers used within the weave at specific points, allowing for the fabric to have strong resistance against further tears.

Long connection zipper

The long connection zipper is the longer, more secure choice of our two connection zipper options. It lets you zip the motorcycle jacket and motorcycle pants together as one. For comfort and for safety.

Short connection zipper

The short connection zipper is the shorter, simpler and quicker choice of our two connection zipper options. It lets you zip the motorcycle jacket and motorcycle pants together as one. For comfort and for safety.

Jeans loop

The loop at the back of this jacket enables you to attach it to your jeans, which prevents the jacket from creeping up: no more exposed back when riding your bike.

Comfort collar

The comfort collar is added to products to offer more comfort in crucial places. An extra soft fabric is used for a cozy finish.

Comfort cuffs

Cuff zipper

The zipper at the cuff allows for easier entry into the sleeve and lets you wear the glove cuff under your outer shell and over your base layer.

Stretch at back

Soft edge at collar

For extra comfort, the inside of the collar is covered with a soft fabric.

Stretch at waist

Stretch at inside arms

Stretch at armholes

Stretch at front

Stretchable cuff

buffalo leather

Buffalo is a type of leather that distinguishes itself from cowhide with a more rugged appearance. The finish provides a classical look, allowing it to age beautifully.

PWR|Shell stretch

cowhide

Cowhide has been used in this garment for optimal fit and protection.

Perforated cowhide

Artificial Leather

A sythetic version of leather with a similar look.