Jacket Airwave 4

Prepared for SEESOFT CE-level 2 Insert Back Protector

The back protector pocket in this REV’IT! garment is tailor-made to accommodate the SEESOFT CE-level 2 back protector insert Type RV – an easy upgrade to maximize safety.

Prepared for SEESOFT CE-level 1 Divided Insert Chest Protector

The protector pocket in this REV’IT! garment is tailor-made to accommodate the Divided Chest Protector SEESOFT CE-level 1 – an easy upgrade to maximize safety.

SEESMART CE-level 1 Elbow Protectors

SEESMART CE-level 1 Shoulder Protectors

SEESMART shoulder protectors offer the highest level of flexibility while still passing the EN 1621-1:2012 CE-level 1 impact tests, in both normal and hot (T+) conditions.

Ready for Avertum Tech-Air® airbag system – ONE SIZE UP

Under this garment you can wear our REV’IT! Avertum Tech-Air® Airbag – or a Tech5 airbag – if you purchase the garment one size bigger than your usual size.If you wish to wear a garment that is marked as “”Ready for Avertum Tech-Air® airbag system””, you must be sure that the garment can accommodate the expansion of the airbag and therefore we recommend following below fit equation:1.Measure chest circumference and divide the measurement by two;2.Measure garment flat on chest line;3.If the difference between point 1 and point 2 is 12 centimeters or bigger the garment is suitable to wear on top of the airbag.Note: Please keep in mind that the garment should be purchased in the correct size in order for the shoulder and elbow protection to fit properly and best protect you in case of a crash. In order to create space for the expansion of the airbag, you can remove all separate layers (thermal liners, water proof liners) that can restrict the expansion of the airbag in the event of a crash. Remove the separate back protector in your garment, if any, when wearing the airbag (a back protector is included in the airbag) and adjust all adjustment straps on body to the widest position.

Laminated reflection on shoulders

Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric. This welding process also eliminates stitching seams, making the garments safer.

Laminated reflective logo on back

This product has a reflective logo at the back of the garment to help riders who are on the road be seen in low light, inclement weather, and at night.

Laminated reflection at lower arms

Retroreflective, fluorescent lamination at the lower arms to aid visibility and improve safety in low-light situation.

Fully ventilated mesh

Adjustment strap at lower arm

Elasticated waist

Flexisnap at collar

The REV’IT! flexisnap makes it possible to adjust the collar circumference easily and personalize its fit to each rider. A jacket is often worn in more then one season, and the flexisnap makes it possible to adjust the collar within seconds. During winter a wider collar circumference accommodates combining the jacket with a balaclava or wind collar, while during summer, a wider circumference lets an all-important cooling wind into the collar.

Adjustment drawcord at hem

Two slit pockets on front

Two inner pockets

Regular fit

The Regular fit is designed for comfortable wear, and it’s tailored to suit different body shapes and sizes. However, it is not considered loose. It falls around the body instead of conforming to the rider’s physique.

Short connection zipper

The short connection zipper is the shorter, simpler and quicker choice of our two connection zipper options. It lets you zip the motorcycle jacket and motorcycle pants together as one. For comfort and for safety.

Jeans loop

The loop at the back of this jacket enables you to attach it to your jeans, which prevents the jacket from creeping up: no more exposed back when riding your bike.

Soft edge at collar

For extra comfort, the inside of the collar is covered with a soft fabric.

V-flap at cuff

Hidden snap button at collar

Snap button closure at the collar designed to be hidden for esthetic purposes.

3D mesh protector pockets

Softshell 3L

3D air mesh

This knitted fabric has an open, 3-dimensional structure that ensures good ventilation while riding. 3D air mesh is a must-have for long touring riders.

PWR|Shell mesh

This PWR|Shell is knitted in an open structure, to allow for breathability and flexibility, which maintains comfort as well as safety.

Polyester ripstop

Mesh

Outer shell made with recycled polyester