One Piece Xena 4 Ladies

Ventilation panels on upper legs

The ventilation panels on this garment allow for optimal airflow to keep the body cool while riding.

Ventilation panels on lower arms

The ventilation panels on this garment allow for optimal airflow to keep the body cool while riding.

Ventilation panels on back side

The ventilation panels on this garment allow for optimal airflow to keep the body cool while riding.

Ventilation panel on center front

Prepared for SEESOFT CE-level 2 Insert Back Protector

The back protector pocket in this REV’IT! garment is tailor-made to accommodate the SEESOFT CE-level 2 back protector insert Type RV – an easy upgrade to maximize safety.

SEESMART CE-level 1 Hip Protectors – RV30

SEESMART hip protectors offer the highest level of flexibility while still passing the EN 1621-1:2012 CE-level 1 impact tests, in both normal and hot (T+) conditions.

BETAC® shoulder protectors “S” Type A-L1

This product includes the impact-absorbing BETAC® shoulder protectors “S” Type A-L1. “S” which stands for shoulders – the region of the body of which it protects, Type A referring to its surface area in which it covers (which is a smaller surface area in comparison to the Type B variant), and L1 which stands for CE-level 1 certification.

BETAC® elbow protectors “E” Type A-L1

This product includes the impact-absorbing BETAC® elbow protectors “E” Type A-L1. “E” which stands for elbows – the region of the body of which it protects, Type A referring to its surface area in which it covers (which is a smaller surface area in comparison to the Type B variant), and L1 which stands for CE-level 1 certification.

BETAC® knee protectors “K+L” Type A-L1

This product includes the impact-absorbing BETAC® knee protectors “K+L” Type A-L1. “K+L” stands for knee and lower leg – the region of the body of which it protects, Type A referring to its surface area in which it covers (which is a smaller surface area in comparison to the Type B variant), and L1 which stands for CE-level 1 certification.

Ready for Avertum Tech-Air® airbag system – ONE SIZE UP

Under this garment you can wear our REV’IT! Avertum Tech-Air® Airbag – or a Tech5 airbag – if you purchase the garment one size bigger than your usual size.If you wish to wear a garment that is marked as “”Ready for Avertum Tech-Air® airbag system””, you must be sure that the garment can accommodate the expansion of the airbag and therefore we recommend following below fit equation:1.Measure chest circumference and divide the measurement by two;2.Measure garment flat on chest line;3.If the difference between point 1 and point 2 is 12 centimeters or bigger the garment is suitable to wear on top of the airbag.Note: Please keep in mind that the garment should be purchased in the correct size in order for the shoulder and elbow protection to fit properly and best protect you in case of a crash. In order to create space for the expansion of the airbag, you can remove all separate layers (thermal liners, water proof liners) that can restrict the expansion of the airbag in the event of a crash. Remove the separate back protector in your garment, if any, when wearing the airbag (a back protector is included in the airbag) and adjust all adjustment straps on body to the widest position.

Laminated reflection on back

Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric.

Safety seams

The stitching in motorcycle garments contributes greatly to the abrasion resistance of the total gear. This is why REV’IT! uses safety seams on garment areas at increased risk of impact. Safety seams have a visible as well as an invisible seam. This construction keeps the material of the outer shell together, even when the visible seam is thorn.

TPU protection at shoulder

TPU protection at knees

TPU elbow sliders

Coccyx Protection

Inner pocket

Tight fit

The Tight fit is designed to be snug and conform to the rider’s body shape. The contouring design ensures that the material and fabrics move with the body, without restricting the range of motion in any situation. This fit is mostly found in base layers and in our race-oriented garments.

Removable lining

Mesh

Polyamide stretch

Comfort and fit-assuring, lining-integrated stretch constructed with durable polyamide.

Speed hump

Comfort collar

The comfort collar is added to products to offer more comfort in crucial places. An extra soft fabric is used for a cozy finish.

Comfort cuffs

Cuff zipper

The zipper at the cuff allows for easier entry into the sleeve and lets you wear the glove cuff under your outer shell and over your base layer.

Stretch at shoulders

Stretch at crotch

Stretch lips at shoulders

Stretch lips at knees

Soft edge at collar

For extra comfort, the inside of the collar is covered with a soft fabric.

Stretch at inside arms

Stretch at armholes

Stretch at front

Stretchable cuff

Stretch at calf

Wind catcher behind front zipper

Stretch at ankle

The stretch at the ankle of this garment allows for more freedom of movement and comfort when being worn, as well as easy on/off.

Calf zipper for easy entrance

This garment has an easy entrance zipper at the calves to more comfortably suit up despite its snug race fit. Simply unzip for extra room when suiting up, then zip it up when you’re ready to go.

Neoprene

Neoprene is a synthetic rubber useful for protective gear. It is abrasion-resistant, chemical-resistant, waterproof, somewhat stretchable, and buoyant.

3D air mesh

This knitted fabric has an open, 3-dimensional structure that ensures good ventilation while riding. 3D air mesh is a must-have for long touring riders.

PWR|Shell stretch

cowhide

Cowhide has been used in this garment for optimal fit and protection.

Perforated cowhide

Artificial Leather

A sythetic version of leather with a similar look.

Artificial nubuck