Jacket Vertical GTX

Detachable thermal liner

2L GORE-TEX fabric

By laminating the GORE-TEX membrane to the fabric, a 100% waterproof, windproof and highly breathable outer shell is created, offering unsurpassed durable wearer comfort.

Prepared for SEESOFT CE-level 2 Insert Back Protector

The back protector pocket in this REV’IT! garment is tailor-made to accommodate the SEESOFT CE-level 2 back protector insert Type RV – an easy upgrade to maximize safety.

Prepared for SEESOFT CE-level 1 Divided Insert Chest Protector

The protector pocket in this REV’IT! garment is tailor-made to accommodate the Divided Chest Protector SEESOFT CE-level 1 – an easy upgrade to maximize safety.

SEEFLEX CE-level 2 Elbow Protectors

Certified CE-level 2 according to the new norm EN 1621-1:2012 the SEEFLEX protector is the latest innovation from the in-house R&D department. The new norm also tests the impact levels in various temperature ranges. The SEEFLEX protectors easily surpass the new norm without sacrificing wearer comfort.

SEEFLEX CE-level 2 Shoulder Protectors

Certified CE-level 2 according to the new norm EN 1621-1:2012 the SEEFLEX protector is the latest innovation from the in-house R&D department. The new norm also tests the impact levels in various temperature ranges. The SEEFLEX protectors easily surpass the new norm without sacrificing wearer comfort.

Ready for Avertum Tech-Air® airbag system – ONE SIZE UP

Under this garment you can wear our REV’IT! Avertum Tech-Air® Airbag – or a Tech5 airbag – if you purchase the garment one size bigger than your usual size.If you wish to wear a garment that is marked as “”Ready for Avertum Tech-Air® airbag system””, you must be sure that the garment can accommodate the expansion of the airbag and therefore we recommend following below fit equation:1.Measure chest circumference and divide the measurement by two;2.Measure garment flat on chest line;3.If the difference between point 1 and point 2 is 12 centimeters or bigger the garment is suitable to wear on top of the airbag.Note: Please keep in mind that the garment should be purchased in the correct size in order for the shoulder and elbow protection to fit properly and best protect you in case of a crash. In order to create space for the expansion of the airbag, you can remove all separate layers (thermal liners, water proof liners) that can restrict the expansion of the airbag in the event of a crash. Remove the separate back protector in your garment, if any, when wearing the airbag (a back protector is included in the airbag) and adjust all adjustment straps on body to the widest position.

Laminated reflection at chest

Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric. This welding process also eliminates stitching seams, making the garments safer.

Laminated reflection at upper arms

Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric. This welding process also eliminates stitching seams, making the garments safer.

Laminated reflective logo on back

This product has a reflective logo at the back of the garment to help riders who are on the road be seen in low light, inclement weather, and at night.

Adjustable elbow protection

The adjustable elbow protection pockets allow you to tailor the CE-rated elbow protection to three different heights to perfectly fit your body and for optimal comfort while riding.

Adjustment strap at lower arm

Adjustment strap at waist

Flexisnap at collar

The REV’IT! flexisnap makes it possible to adjust the collar circumference easily and personalize its fit to each rider. A jacket is often worn in more then one season, and the flexisnap makes it possible to adjust the collar within seconds. During winter a wider collar circumference accommodates combining the jacket with a balaclava or wind collar, while during summer, a wider circumference lets an all-important cooling wind into the collar.

Adjustment tab at cuffs

Adjustment drawcord at hem

Inner pocket within thermal liner

The internal pocket within the thermal liner allows for additional storage and for riders to keep personal items close.

Two waterproof inner pockets

Waterproof slit pocket on sleeve

The sleeve features a small pocket to hold a card or paper. The pocket is easy accessible.

Two waterproof slit pockets on front

Slit pocket at back

A slit pocket at the lower back allows for easily accessible storage of personals where it doesn’t interfere with the rider.

Regular fit

The Regular fit is designed for comfortable wear, and it’s tailored to suit different body shapes and sizes. However, it is not considered loose. It falls around the body instead of conforming to the rider’s physique.

Air outlet on upper back

VCS|Panel with FidLock® magnetic fastener

Removable panels for optimum ventilation. Ventilation is nice on warmer days, but not as desirable in cold weather. The panels can be kept open due to the FidLock magnetic Fastener. The Fidlock® magnetic fastener not only uses the attraction but also the repulsion of magnets. This leads to a robust closure with high locking strength that can still be easily opened with one hand while riding.

Aquadefence panels on chest

3D mesh

Mesh

Prepared for vest connector NEON

The Vest connector NEON allows you to the upgrade your jacket with a vest that quickly and easily attaches. The highly visible vest offers enhanced safety.

Long connection zipper

The long connection zipper is the longer, more secure choice of our two connection zipper options. It lets you zip the motorcycle jacket and motorcycle pants together as one. For comfort and for safety.

Short connection zipper

The short connection zipper is the shorter, simpler and quicker choice of our two connection zipper options. It lets you zip the motorcycle jacket and motorcycle pants together as one. For comfort and for safety.

Soft edge at collar

For extra comfort, the inside of the collar is covered with a soft fabric.

Two-way Collar Snap Closure System

The two-way collar snap closure system works to close the collar in inclement weather and also flips back and reverses to use the same snap closure to keep the collar open and out of the way to allow in fresh air.

2L nylon 400D GORE-TEX fabric   

This fabric is made of rugged 400 denier high-tenacity nylon that delivers superior abrasion and tear resistance. Laminating theGORE-TEX membrane to the nylon fabric creates a 100 percent waterproof, windproof and highly breathable outer shell that offers excellent wearer comfort.

3D air mesh

This knitted fabric has an open, 3-dimensional structure that ensures good ventilation while riding. 3D air mesh is a must-have for long touring riders.