Jacket Defender 3 GTX

Detachable thermal liner

Prepared for SEESOFT CE-level 2 Insert Back Protector

The back protector pocket in this REV’IT! garment is tailor-made to accommodate the SEESOFT CE-level 2 back protector insert Type RV – an easy upgrade to maximize safety.

Prepared for SEESOFT CE-level 1 Divided Insert Chest Protector

The protector pocket in this REV’IT! garment is tailor-made to accommodate the Divided Chest Protector SEESOFT CE-level 1 – an easy upgrade to maximize safety.

SEEFLEX CE-level 2 Elbow Protectors

Certified CE-level 2 according to the new norm EN 1621-1:2012 the SEEFLEX protector is the latest innovation from the in-house R&D department. The new norm also tests the impact levels in various temperature ranges. The SEEFLEX protectors easily surpass the new norm without sacrificing wearer comfort.

SEEFLEX CE-level 2 Shoulder Protectors

Certified CE-level 2 according to the new norm EN 1621-1:2012 the SEEFLEX protector is the latest innovation from the in-house R&D department. The new norm also tests the impact levels in various temperature ranges. The SEEFLEX protectors easily surpass the new norm without sacrificing wearer comfort.

Ready for Avertum Tech-Air® airbag system – ONE SIZE UP

Under this garment you can wear our REV’IT! Avertum Tech-Air® Airbag – or a Tech5 airbag – if you purchase the garment one size bigger than your usual size.If you wish to wear a garment that is marked as “”Ready for Avertum Tech-Air® airbag system””, you must be sure that the garment can accommodate the expansion of the airbag and therefore we recommend following below fit equation:1.Measure chest circumference and divide the measurement by two;2.Measure garment flat on chest line;3.If the difference between point 1 and point 2 is 12 centimeters or bigger the garment is suitable to wear on top of the airbag.Note: Please keep in mind that the garment should be purchased in the correct size in order for the shoulder and elbow protection to fit properly and best protect you in case of a crash. In order to create space for the expansion of the airbag, you can remove all separate layers (thermal liners, water proof liners) that can restrict the expansion of the airbag in the event of a crash. Remove the separate back protector in your garment, if any, when wearing the airbag (a back protector is included in the airbag) and adjust all adjustment straps on body to the widest position.

Laminated reflection on back

Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric.

Reflective logo at upper arms

Reflective logo on back

Reflective logo at chest

Laminated reflection at front

Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric. This welding process also eliminates stitching seams, making the garments safer.

Adjustment strap at lower arm

Elasticated upper arm

Flexisnap at collar

The REV’IT! flexisnap makes it possible to adjust the collar circumference easily and personalize its fit to each rider. A jacket is often worn in more then one season, and the flexisnap makes it possible to adjust the collar within seconds. During winter a wider collar circumference accommodates combining the jacket with a balaclava or wind collar, while during summer, a wider circumference lets an all-important cooling wind into the collar.

Adjustment tab at cuffs

Adjustment drawcord at hem

Variable height adjustment straps at waist

Adjustment zippers at side seam

Double adjustment strap at waist

Stash pocket on back

Slit pocket on sleeve

Two inner pockets

Waterproof inner pocket within waterproof liner

The internal pocket within the waterproof liner is waterproof.

Inner pocket within thermal liner

The internal pocket within the thermal liner allows for additional storage and for riders to keep personal items close.

Two waterproof stash pockets at waist

3D mesh

Mesh

Prepared for vest connector NEON

The Vest connector NEON allows you to the upgrade your jacket with a vest that quickly and easily attaches. The highly visible vest offers enhanced safety.

Long connection zipper

The long connection zipper is the longer, more secure choice of our two connection zipper options. It lets you zip the motorcycle jacket and motorcycle pants together as one. For comfort and for safety.

Short connection zipper

The short connection zipper is the shorter, simpler and quicker choice of our two connection zipper options. It lets you zip the motorcycle jacket and motorcycle pants together as one. For comfort and for safety.

Short connection zipper in detachable waterproof liner

Adding to the versatility of the waterproof detachable liner, it comes with a short connection zipper, allowing you to securely fasten it to your riding trousers (or jeans via the Safeway 2 belts), when possible.

Cuff zipper

The zipper at the cuff allows for easier entry into the sleeve and lets you wear the glove cuff under your outer shell and over your base layer.

Stretch at elbows

Soft edge at collar

For extra comfort, the inside of the collar is covered with a soft fabric.

Two-way Collar Snap Closure System

The two-way collar snap closure system works to close the collar in inclement weather and also flips back and reverses to use the same snap closure to keep the collar open and out of the way to allow in fresh air.

External hang loop

Whether carrying the jacket or hanging it out to dry after a wet ride, the sturdy external hang loop is a practical addition to the design.

Prepared for REV’IT! Segur neck brace

Separately wearable GORE-TEX 2-in-1 waterproof liner

This GORE-TEX 2-in-1 liner has been two functions. It protects against the wind and cold when zipped into a garment but can also be worn as a jacket by itself, providing the same functionality, reducing the need for additional layers when riding.

VCS|Panel with FidLock® magnetic fastener

Removable panels for optimum ventilation. Ventilation is nice on warmer days, but not as desirable in cold weather. The panels can be kept open due to the FidLock magnetic Fastener. The Fidlock® magnetic fastener not only uses the attraction but also the repulsion of magnets. This leads to a robust closure with high locking strength that can still be easily opened with one hand while riding.

Zipper at center front

Ventilation panels on chest

The ventilation panels on this garment allow for optimal airflow to keep the body cool while riding.

XL zippers on sleeves

Zippers at back

Protective print at elbows

Neoprene

Neoprene is a synthetic rubber useful for protective gear. It is abrasion-resistant, chemical-resistant, waterproof, somewhat stretchable, and buoyant.

PWR|Shell 750D

Consisting of 100% high-performance polyamide yarns, PWR|Shell 750D takes the best properties of a nylon with a high melting point, tremendous tear and abrasion-resistance, and excellent durability and then puts the unique REV’IT! design stamp on it. It provides high-performance protection for every rider.

PWR|Shell stretch

Parkskin

PWR| shell ripstop

Fabric made for durability and abrasion resistance thanks to its special ripstop weaving with interwoven reinforcement threads at regular intervals.

Detachable 3L GORE-TEX liner with a tricot backer

The liner used in this garment is a detachable 3-layer (3L) GORE-TEX liner with a tricot backer. Keep the liner in for 100% waterproofing. For the rides that don’t require waterproofing, easily take this liner out and store it away.