Jacket Control Air H2O Ladies

$159.00

Female-specific, ventilated textile jacket with detachable waterproof liner

Size

Color

Clear

SKU: N/A Categories: Categories, Jackets, Women Tags: Black-White, REV'IT, Women Brand: REV'IT

For female sport street riders looking for a heavily ventilated jacket (with a waterproofing component) that also want the aesthetic of speed wrapped into a CE-class AA jacket, we bring you the Control Air H2O Ladies.

Its own vibe
When we created the Control Air H2O Ladies jacket, we had a very distinct vision. It was to be the seamless blending of both motorsport and sportswear (think lamination around the zippers and tonal graphic prints). And unlike in the past – where any item in a “family” of jackets/pants/one-pieces – echoed almost identical aesthetics, we did something new. The Control Air H2O Ladies jacket incorporates the use of ergonomic gradient shapes built out of diamonds and applied it in its own unique way along the back of the arms. This way, it’s immediately recognizable as a member of the “Control” series, but with its own fashion-focused twist.

Stay cool. Stay dry.
The Control Air H2O Ladies is heavily ventilated – think about 2/3 (or slightly more) of the front constructed with PWR|Mesh, and about the same ratio around back. That said, we recognize not every day will be as hot as another. For the days when you need some protection against the wind and rain, we included a separately wearable hydratex 2L waterproof membrane.

Protection inserts

Prepared for SEESOFT CE-level 2 Insert Back Protector

The back protector pocket in this REV’IT! garment is tailor-made to accommodate the SEESOFT CE-level 2 back protector insert Type RV – an easy upgrade to maximize safety.

SEESMART CE-level 1 Shoulder Protectors

SEESMART shoulder protectors offer the highest level of flexibility while still passing the EN 1621-1:2012 CE-level 1 impact tests, in both normal and hot (T+) conditions.

SEESMART CE-level 1 Elbow Protectors

SEESMART elbow protectors offer the highest level of flexibility while still passing the EN 1621-1:2012 CE-level 1 impact tests, in both normal and hot (T+) conditions.

Ready for Avertum Tech-Air® airbag system – ONE SIZE UP

Under this garment you can wear our REV’IT! Avertum Tech-Air® Airbag – or a Tech5 airbag – if you purchase the garment one size bigger than your usual size.If you wish to wear a garment that is marked as “”Ready for Avertum Tech-Air® airbag system””, you must be sure that the garment can accommodate the expansion of the airbag and therefore we recommend following below fit equation:1.Measure chest circumference and divide the measurement by two;2.Measure garment flat on chest line;3.If the difference between point 1 and point 2 is 12 centimeters or bigger the garment is suitable to wear on top of the airbag.Note: Please keep in mind that the garment should be purchased in the correct size in order for the shoulder and elbow protection to fit properly and best protect you in case of a crash. In order to create space for the expansion of the airbag, you can remove all separate layers (thermal liners, water proof liners) that can restrict the expansion of the airbag in the event of a crash. Remove the separate back protector in your garment, if any, when wearing the airbag (a back protector is included in the airbag) and adjust all adjustment straps on body to the widest position.

Visibility

Laminated reflection on back

Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric.

Ventilation

Fully ventilated mesh

Adjustability

Adjustment strap at waist

Adjustment tab at upper arm

Pockets

Two slit pockets on front

Waterproof inner pocket within waterproof liner

The internal pocket within the waterproof liner is waterproof.

Fit

Regular fit

The Regular fit is designed for comfortable wear, and it’s tailored to suit different body shapes and sizes. However, it is not considered loose. It falls around the body instead of conforming to the rider’s physique.

Features

Short connection zipper

The short connection zipper is the shorter, simpler and quicker choice of our two connection zipper options. It lets you zip the motorcycle jacket and motorcycle pants together as one. For comfort and for safety.

Jeans loop

The loop at the back of this jacket enables you to attach it to your jeans, which prevents the jacket from creeping up: no more exposed back when riding your bike.

Soft edge at collar

For extra comfort, the inside of the collar is covered with a soft fabric.

Waterproofing

Detachable hydratex|Lite liner

Protective features

3D mesh protector pockets

Outer shell

High density polyester 600D

This fabric takes polyester yarn and weaves it with a finer polyester yarn, to create a high woven density that increases protection and abrasion-resistance.

Polyester ripstop

Lining

Mesh

Sustainability

Outer shell made with recycled polyester

Wash & Care

Outershell

	Machine wash 30°C, mild cycle
	Do not bleach
	Do not tumble dry
	Do not iron
	Do not dry clean

Warnings

Refer to the user manual

Remove protectors before cleaning

Wash inside out

Removable waterproof liner

	Machine wash 30°C, mild cycle
	Do not bleach
	Do not tumble dry
	Do not iron
	Do not dry clean